While you might not think of it that much, the toilet is no wonder one of the most important pieces of equipment in the house. And when it breaks down, all hell seems to go loose.
So, here are the fixes to some of the most common problems that might occur on your bathroom’s “throne”.
1. Flush is weak
This one is usually more prevalent with older models, such as those built during the 90s, and is usually caused by hard water deposits in the syphon jet hole or the bowl rim swirl holes. To remedy this, you need to thoroughly acid-wash the bowl, recommends goglover.com. For this, mix one part acid with 10 parts water. You then pour in half of the solution into the overflow tube and let it set for 30 minutes. Afterwards, pour the remaining solution. After 30 minutes, you can flush the toilet and see an improvement.
2. “Phantom flushes”
This one happens when your toilet begins to refill itself as if someone has flushed it. This is often due to a worn flapper valve that causes the water from the tank back into the bowl. To confirm, you can use the dye test to see the leaks. From there, it’s just a matter of disassembling the toilet and replacing the faulty valve with a new one.
3. The toilet doesn’t completely flush
Sometimes you will notice that all that gunk doesn’t seem to go down with just a single flush and you need to do several takes before it completely flushes. This might be due to a variety of problems. Open the tank to see what’s causing it. For instance, the chain connecting the flapper cap to the flush handle might be too long that it limits the cap from opening fully. Alternatively, it can be caused by float valve not working properly.
4. The toilet making gurgling sounds when flushing
This is almost always due to a foreign object that has fallen into the bowl and clogging it. To see the clog, lower a flashlight tied to a string and illuminate the drain. In order to remove the trapped object, you need to run water backwards from the drain into the bowl. You can do this by running a garden hose from the rooftop vent out to the bowl.
In case these problems still persist, it would be best to call a professional plumbing service Salt Lake City. In more severe cases, you might also need to replace your toilet completely.