It’s all thanks to your home’s plumbing network, particularly the water heating system, that you can enjoy the luxury of hot baths and showers, have fresh laundry, clean kitchen and dining wares, and an overall clean and healthy home.
These alone should already make you more attentive to the health of your water heater, seeing as even the smallest issues with it can already impact the overall comfort and convenience you enjoy. One way to prevent more serious problems is to know how to spot issues – and how to address them before they worsen.
Here are some of the signs that should prompt you to have a licensed Orem plumber assess and carry out the necessary repairs on your hot water system before they become safety risks.
You can’t remember when the last time a plumber checked the anode rod
It’s vital to have a professional inspect the water heater’s anode rod regularly, or you run the risk of having the entire water tank go into disrepair. An anode rode may be expendable, but for the simple, yet crucial role of attracting the contaminants that the water carries. It’s designed to disintegrate after several years, and your role is to replace it before it completely does. Failure to do so can result in the rusting of the tank’s internal lining.
In the event, you can’t remember when the last time you had this important part checked or replaced, then now is the best time to do so.
Although inefficient heating can result from some causes, such as low pressure or simultaneous use, a common reason is extensive scaling. This is especially true for homes that receive water with a considerable hardness rating. Another possible reason is leakage, which is even more serious, since this can also lead to water damage.
Knowing how to detect problems early on can make all the difference in your water heater’s performance and lifespan. So, as soon as you notice the symptoms above, contact a licensed plumber right away.
Over the years, hot water tanks were the standard when it comes to water heaters. These days, however, newer types are challenging the popularity of the traditional ones. The most notable of them is the tankless water heater.
Tankless water heaters are deemed as a better version of the tank type. Tankless units are much more compact than the latter. Other than this, manufacturers tend to stress other selling points, including energy efficiency, cost-effectiveness, and a reliable supply of hot water.
A new water heater can be a costly investment. If you are planning to buy one in Orem, Utah, especially a tankless type, you have to be wary of the claims made by the suppliers or manufacturers. Are tankless water heaters really that good? Read on to find out.
Tankless water heaters need less energy to run than the tank type. The difference is not that much when you use natural gas powered tankless water heaters. If you want the more energy efficient type, you should go for the electric type.
The amount of hot water your family uses daily is also another factor you have to weigh in. The energy savings are greater in larger households. If you are living alone, it might not mean much.
Tankless water heaters are usually more costly than the tank types. The tankless ones are often seen as more cost-effective in the long run. This is due to energy savings you can reap.
Then again, getting a new water heater calls for installation services. If you replace a tank type with a tankless one, you might also face extra costs for the set-up of a new vent system. Tankless types are more complex too. As a result, you might pay more for maintenance and repair services. The good thing is that spending on regular maintenance is better than dealing with costly problems and damages caused by a faulty water heater system.
Reliable Supply of Hot Water
Perhaps, the best thing about tankless water heaters is their ability to provide a reliable supply of hot water. You do not have to wait just like you would do with a hot water tank. A tankless unit offers an unlimited supply of hot water as long as there are no problems with the water heater, as well as with the power and water supplies.
If you are thinking about buying a tankless water heater, weigh in the pros and cons first. Use this guide to make a wise decision and ensure the best results.
Water heating accounts for 12% of a household’s utility bill; this is after cooling and lighting. A lot of people cannot afford to buy a new water heater. However, the good news is that you can heat your water more efficiently and save up on bills. With low cost improvements and habit changes, you’ll significantly save up on energy. Here are some practical ways you can do that.
A lot of water heaters have their thermostats preset at 140 degrees. Turning your tank’s thermostat down by 10 degrees saves you 3%-5% on your utility bill. According to the Energy Department, lowering your thermostat to 120 degrees is enough for your daily needs.
A simple leak of one drip per second costs you up to $1 a month. This doesn’t seem like a lot, but if you’re getting over 60 drips a minute, this could add up to your monthly energy bill. To reduce this, have a heating expert check your water heater for any leaks and fix them accordingly.
Old showerheads and faucets use twice as much water as new ones. To cut your costs, you need to install faucets and showerheads with low flow rates. This is a small investment that guarantees you up to 60% savings on your energy bills.
Insulation can save you so much on your utility bills. Remember not to cover the thermostat or the water heaters bottom as this could interfere with the normal functioning of a water heater. Heat traps can save you $15-$30 on your monthly bills. Have a professional install this on your existing tank.
You can still save money, conserve energy and enjoy using hot water in your home. Keep these life hacks in mind and watch the significant improvements you’ll notice.
When shopping for a new hot water system, you need to consider the type of fuel or energy source you will use – particularly its availability and overall costs. This is important because the heater’s fuel will have an impact on your annual operation cost, energy efficiency, performance, and size.
Considering the availability of fuel or energy source
In Australia, consumers have access to a multitude of fuel types and energy sources that run hot water systems. Nonetheless, you should still determine its availability in your specific area. Availability influences costs, so choosing the right one will help you trim your annual water heating expenses.
As FallonSolutions.com.au notes, electricity is one of the most common sources of energy for hot water systems in Australia. These fuel the traditional storage heaters, as well as the heat pump and tankless/demand-type systems. Natural gas hot water systems are also popular because — like their electrical counterparts — they are ideal for traditional and tankless/instantaneous systems.
Aside from electrical and natural gas heaters, fuel oil, geothermal-energy, propane, and solar-energy hot water systems are available.
Speaking with a highly qualified water heater technician will help you assess and determine which of these will provide you the greatest in terms of performance, energy-efficiency, longevity, and annual savings.
Comparing costs and types
Compare the costs and types of hot water systems before making any purchase, especially if there are several available in your specific area. Comparison is a must-do when constructing a new home. Nonetheless, do your homework even if you are just replacing an existing system.
With the right choice for your water heating system, you can avoid high costs and enjoy hot baths during the cold days.